Installation & Assembly Service
Professional LED installation without hassle
From a single Hexagon LED set to a complete automotive space: HexagonLED helps you with a neat, professional, and well-tuned installation.
Install it yourself or have it installed?
Our Hexagon LED systems are developed with easy assembly in mind. Depending on the space and the chosen configuration, you can mount the system yourself or use our professional installation service.
Self-assembly
Suitable when you want to perform the assembly yourself and the electrical connection can be easily made.
Professional assembly
Have your LED system installed by experienced technicians for a neat and professional finish.
Complete space
Larger projects can also be prepared based on the space, ceiling layout, and desired configuration.
What do you receive with your Hexagon LED set?
The exact contents may vary per version. A standard Hexagon LED system includes the necessary components for mounting and connection according to the relevant product configuration.
- LED frames with integrated lighting
- Mounting materials
- Screws and/or tie-wraps
- Power cable with plug
- Installation manual
- Connectors for extensions if applicable
Please note: always check the included manual and product information of your specific configuration before starting the installation.
3 ways to mount Hexagon LED
1
Fixed ceiling mounting
The system can be attached to a flat and suitable ceiling with appropriate fasteners. This is a common solution for garages, workshops, and detailing studios.
2
Mounting to a grid system
With a suitable grid system, the LED system can be attached with appropriate fasteners, such as tie-wraps where technically suitable.
3
Flexible setup
Depending on the configuration, the system can be set up flexibly. This allows you to adjust the lighting arrangement to the layout of your space.
+
Expanding the installation
In modular configurations, systems can be combined. For larger installations, it is advisable to determine the total configuration and electrical load in advance.
Electrical connection and safety
Mounting an LED system is different from connecting an electrical installation. Mechanical assembly can be relatively simple, but work on the fixed electrical installation must be carried out safely and according to applicable regulations.
Check the power supply
Check in advance whether the available power supply is suitable for the chosen configuration.
Test before mounting
Check the system before definitively securing the entire installation.
Work safely
Turn off the power when performing work on the electrical connection.
Do you have doubts about the electrical connection?
Have work on the electrical installation carried out by a qualified professional.
How to prepare the installation properly
Good preparation ensures faster assembly and a neater end result.
- Measure the length and width of the space
- Check the ceiling height
- Determine the desired position of the lighting
- Check the available power supply
- Ensure a clean and suitable mounting surface
- Test the lighting before final assembly
- Preferably assemble with two people
- Use the manual for your specific product configuration
Professional installation service
Don't want to spend time on assembly or want to ensure a professional placement? HexagonLED offers an installation service for customers who want their LED lighting professionally installed.
HexagonLED Installation Service
€60 per hour
On average, we estimate about 2 hours per set. The actual assembly time may vary depending on the space, configuration, ceiling type, and on-site conditions.
Request installation →More than just installing LEDs
Do you want your garage, detailing studio, or workshop to be fully professionally executed? In addition to installing LED lighting, we can also think along about the appearance and preparation of the space.
Ceiling finish
We can advise on painting the existing ceiling black if this matches your desired aesthetic.
Black suspended ceiling
Replacing an existing suspended ceiling with black gypsum vinyl panels can also be part of a total project.
Automotive aesthetic
Combine lighting with a professional floor, wall finish, and other solutions for a complete space.
Want to tackle a complete space?
Discuss your garage, workshop, or detailing studio with our team.
Installation for garages, workshops, and detailing studios
The correct assembly depends on the application. A hobby garage, professional workshop, and detailing studio may each require a different light configuration and installation.
Garages
Professional ceiling lighting for hobby garages, luxury garages, and automotive spaces.
View garage lighting →
Workshops
Even lighting for automotive and technical work.
View workshop lighting →
Detailing studios
Combine general Hexagon LED lighting with specialized vehicle inspection lighting.
View detailing lighting →Frequently asked questions about LED installation
Can I install Hexagon LED myself?
Yes. The systems are designed with easy assembly in mind. The method of attachment and connection depends on the specific configuration and the space.
Is technical knowledge required for assembly?
For mechanical assembly, extensive technical knowledge is not always necessary. For work on the electrical installation, we recommend a qualified professional.
How long does professional installation take?
As a guideline, we estimate about two hours per set. The actual time depends on the configuration, space, ceiling type, and on-site conditions.
How much does the installation service cost?
The installation service costs €60 per hour. On average, mounting one set takes about two hours.
Can HexagonLED install my lighting on-site?
Yes. For customers who want to use professional assembly, HexagonLED offers an installation service. Contact us to discuss your situation and project.
Can the lighting be mounted on a suspended ceiling?
This is possible depending on the type of grid system and the available construction. The attachment must be sufficiently load-bearing and suitable for the chosen installation.
Can a Hexagon LED system be expanded?
In modular configurations, multiple systems can be combined. For larger installations, the total configuration and electrical load must be considered in advance.
Can you also paint my ceiling black?
Yes. We can also discuss work related to ceiling finishes, including painting an existing ceiling black or replacing an existing suspended ceiling with black gypsum vinyl panels.
Can HexagonLED help with a complete garage?
Yes. For larger projects, we can advise on lighting, assembly, and the desired appearance of the space.
Where can I go if I need help?
Contact HexagonLED via the contact form or send an email to info@hexagonled.nl.
Professional LED Installation
Have your LED installation professionally executed
No hassle with assembly. Discuss your space, configuration, and desired finish with HexagonLED.
